< Back

ASCOTT Alpha+ Salt Spray Testing Chambers S and SP Series

S Series Key Features: 

  • Designed specifically for short-terms tests (up to 240 hours duration).
  • Cabinet heated by externally mounted heater mats, protecting them against damage from the corrosive climate inside the cabinet, also ensuring uniform heat distribution inside the cabinet.
  • Heated bubble tower humidifies the compressed air en-route to the salt fog atomiser, in full compliance with international test standards.
  • Bubble tower can be topped up with water automatically, or by hand via the manual filler port.
  • Utilises the atomisers’ venturi effect combined with the air pressure regulator and gauge to deliver a uniform and continuous fall-out of salt fog on to the samples under test.
  • Supplied with a 90L external salt water solution tank, easier to fill and clean than an integral tank.
  • The all plastic atomiser has an integral filter in addition to a filter on the reservoir feed pipe to prevent salt crystal build-up blocking the outlet nozzle and disrupting the test.
  • Cabinets can be operated with a wet or dry base.
  • Insulated non-transparent roof blanket, offering greater thermal efficiency available as an option.

 

SP Series Key Features: 

  • Designed specifically for long-terms tests (over 240 hours duration).
  • Cabinet heated by externally mounted heater mats, protecting them against damage from the corrosive climate inside the cabinet, also ensuring uniform heat distribution inside the cabinet.
  • Heated bubble tower humidifies the compressed air en-route to the salt fog atomiser, in full compliance with international test standards.
  • Bubble tower can be topped up with water automatically, or by hand via the manual filler port.
  • Supplied with a 90L external salt water solution tank, easier to fill and clean than an integral tank.
  • Additional and larger capacity tanks available for reduced changeover time on long-term testing.
  • The all plastic atomiser has an integral filter in addition to a filter on the reservoir feed pipe to prevent salt crystal build-up blocking the outlet nozzle and disrupting the test.
  • Cabinets can be operated with a wet or dry base.
  • Insulated non-transparent roof blanket, offering greater thermal efficiency available as an option.
  • SP models are equipped with an advanced control system featuring a peristaltic pump based salt water delivery system, coupled with a user adjustable precision speed controller.
  • Ensures consistent fall-out of salt spray / fog on to the test samples, over longer term duration tests (240+ hours of continuous salt spray testing) especially if such testing is unattended.
ASK A QUICK QUESTION
ASCOTT Alpha+ Salt Spray Testing Chambers S and SP Series

Ask a Quick Question