< Back

STR-32G Sun Tracker

The heavy duty Sun Tracker STR-32G completes the extensive EKO Sun Tracker range and is capable to take the highest load without compromizing the STR typical high precision and performance. Similar to the STR-21G/22G it comes with with fully automated set up procedure through a GPS receiver providing increased reliability and enhanced functionality.

Although it has a 4 times higher load capacity the size didn't change. The most compact heavy duty sun trackers are perfectly suited to support all kinds of Global, Diffuse and Direct Radiation measurement sensors and spectroradiometers. Besides the standard EKO sensor mounts various mountings are available.

From sun rise to sun set the compact EKO Sun-Tracker guarantees accurate sun tracking and pointing of the attached solar sensors. The 2-axis tracker automatically adjusts to the sun’s position by the sun sensor closed-loop control system, even if the tracker is not oriented or leveled properly.


  • Accurate set up by automatic retrieval of position and time at any place on earth
  • Easy installation and operating without need of a computer
  • Operating status indication by LED signal
  • Easy installation and operating without need of a computer
  • Continuous clock synchronization enabling permanent reliable and accurate positioning of the solar radiometers measuring direct, diffuse and global irradiance
  • RS-232 serial interface for extended position control and status information
Solar Trackers


Model STR-32G Double Arms
Motor Stepping motor
Driving technology Harmonic Drive
Pointing accuracy < 0.01° (Solar Elevation: 0 to 87°)
Angle resolution 0.0036°
Rotation angle Elevation-angle(-15° to +95°) Azimuth-angle(0° to +/-180°)
Torque 60 Nm (30 + 30 Nm)
Load Capacity 60 kg (balanced)
Tracking mode Sun-sensor mode and Calculation mode are automatically switched.
Tracking accuracy of Sun-sensor mode 0.01°
Sun-sensor field of view +/- 15°
GPS Sensor measurement accuracy Horizontal Position: Below 15m (2drms). GPS Positioning
GPS Sensor positioning start time < 5min. (depends on the recieving condition.)
LED Indicator Power, GPS status
Environmental Protection IP65
Temperature range -40~+50°C (-30 ~ +50°C at cold start)
Altitude for solar position calculation No Limitation
Communication RS-232C, 9600bps, 8N1
Power requirement AC100 to 240V, 50/60Hz, 20W DC21 to 32V, 20W for DC optional Sun Tracker (*Power consumption <15W)
Dimension 430(W) x 380(D) x 250(H) mm
Weight 15 kg

*Power consumption under normal load and operating conditions @ 25°C.

Standard STR-32G Sun Tracker system includes

  • STR-32G Tracker with built in GPS
  • Four Quadrant Sun Sensor which automatically compensates for mechanical misalignment
  • Diagnostics and control software

Sun Tracker Options

  • Various top mounting plates for all common pyranometers or pyrgeometers models
  • Spectroradiometer side mountings
  • Additional pyrheliometer mounts
  • Shading ball assembly (2 radiometer positions)
  • Heavy duty tripod
Related Products

Ask a Quick Question